Installation Accessories
Engineered Accessories for Faster, Safer, More Reliable Installations
Roll-a-ramp
Get 80% more use out of your No Lift with a Roll a Ramp – 7 out of 10 No Lift customers buy a Roll a Ramp
Most orders ship within 1-2 days of payment. Next Day or 2 day shipments must be placed by 10am PT to go out same day.
Is the No Lift System Install System just a cart? Nope! We call it a “System” because it is much more than that.
The access to getting into a kitchen is always a challenge and different for every job site. Whether you’re going up stairs, down stairs, over a threshold, or there are no stairs (which is often the case on new construction), the Roll-A-Ramp is a “must-have” tool for every install rig.
BONUS TIP: Also, for those raised bar countertops, add blocks under your Roll-A-Ramp to get the increased elevation to easily install that counter. That tip was sent to us by a No Lift customer on our No Lift System user group on Facebook. Click here to join and see how others are using their No Lift Install Systems.
Includes:
1500 lb. capacity
9 – 1′ x 30″ PIECES
2 – 6″ APPROACH PLATES
2 – 12″ X 36″ FLOOR MATS FOR PROTECTION
All products will be shipped out the next business day (including orders with next day shipping).
Roll-A-Ramp® support stands to extend the 10′ ramp. Roll-A-Ramp® is the most portable and versatile ramp available.
Includes:
2 Riser Bars
2 Tee Handles
2 Alum Blocks
2 Riser Bases
All products will be shipped out the next business day (including orders with next day shipping).
5′ x 30″ Roll-A-Ramp® Extension with support stands to extend the 10′ ramp. Roll-A-Ramp® is the most portable and versatile ramp available.
Includes:
5 – 1′ x 30″ Ramp Sections
2 – 6″ Approach Plates
4 – Quick Connect Pins
2 – Support Stands
Info Packet
Sink Savers – Counter Handlers
Reduce broken counters by 100% with the CH Deluxe! – 4 out of 10 No Lift customers invest in a Counter Handler
All products will be shipped out the next business day (including orders with next day shipping).
Developed by our friend Eric Rolseth at Fill a Chip, the Counter Handler is a must-have if you are installing antiqued, leathered, and satin-finished granites because standard suction cups will not stay attached. With the battery-powered Grabo cups, the rails NEVER lose suction, even on textured surfaces.
This package includes 3 Grabo cups, 3 patented bridges, and 4 aluminum rails so you can get ALL your counters installed without risking them during install.
All products will be shipped out the next business day (including orders with next day shipping).
This tool should be in every install rig.
The No Lift is designed to fit in the majority of situations you come across when installing counters. If we made the No Lift bigger, it wouldn’t fit in the kitchen or between sink runs and islands. If we made the No Lift smaller, it wouldn’t be able to hold the counters you see most.
BUT fragile, awkward, and big counters need more support sometimes…so what do you do? The Counter Handler is the solution. The Counter Handler adds support to the top of the piece while the No lift provides support from the bottom. When the piece is transferred to the cabinets from the No Lift, the Counter Handler continues to provide support until the counter is safely transferred to the cabinets. With the variety of rail sizes, bridges, and Grabos, you can properly support that fragile, expensive quartzite counter you have been dreading.
The deluxe package includes:
4 – battery-powered Grabo PRO suction cups, Grabo hard case, and charger
4 – 23″ Counter Handler Bridges
2 – 105″ Rails
2 – 84″ Rails
2 – 60″ Rails
8 – Counter Handler Quick Release Pins
All products will be shipped out the next business day (including orders with next day shipping).
Developed by our friend Eric Rolseth at Fill a Chip, the Counter Handler is a must-have if you are installing antiqued, leathered, and satin-finished granites because standard suction cups will not stay attached. With the battery-powered Grabo cups, the rails NEVER lose suction, even on textured surfaces.
This deluxe package includes:
4 – 23″ Counter Handler Bridges
2 – 105″ Rails
2 – 84″ Rails
2 – 60″ Rails
8 – Counter Handler Quick Release Pins
All products will be shipped out the next business day (including orders with next day shipping).
Counter Handler – quick release pin
All products will be shipped out the next business day (including orders with next day shipping).
60″ Rail
All products will be shipped out the next business day (including orders with next day shipping).
Developed by our friend Eric Rolseth at Fill a Chip, the Counter Handler is a must-have if you are installing antiqued, leathered, and satin-finished granites because standard suction cups will not stay attached. With the battery-powered Grabo cups, the rails NEVER lose suction, even on textured surfaces.
This package includes 3 patented bridges and 6 aluminum rails so you can get your counters installed without risking them during install.
All products will be shipped out the next business day (including orders with next day shipping).
GRABO Pro portable electric vacuum lifter with digital pressure gauge. Comes with Grabo blow mold hard case.
Pump Turn on or off Automatically: GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.
Upgrade with digital display
Strong vacuum pump 375lbs Max Load
4 Strap Holes on both sides are easy to pull & lift
All products will be shipped out the next business day (including orders with next day shipping).
Counter Handler Bridge – 23″
Note:Quick Release Pins sold seperately
All products will be shipped out the next business day (including orders with next day shipping).
106″ Rail
All products will be shipped out the next business day (including orders with next day shipping).
84″ Rail
All products will be shipped out the next business day (including orders with next day shipping).
Expect 2-3 week delay, waiting on bridges.
Developed by our friend Eric Rolseth at Fill a Chip, the Counter Handler is a must-have if you are installing antiqued, leathered, and satin-finished granites because standard suction cups will not stay attached. With the battery-powered Grabo cups, the rails NEVER lose suction, even on textured surfaces.
This package includes 2 Grabo cups, 2 patented bridges, and 2 aluminum rails so you can get your counters installed without risking them during install.
All products will be shipped out the next business day (including orders with next day shipping).
Fragile counters are scary to install. Fragile islands are REALLY scary!
And as islands get bigger your risks increase.
You can reduce the risk of remaking large expensive islands with the Island Handler, No Lift’s own custom package using Grabo Pro cups, 42” Panel Handler bridges, and No Lift’s extra long rails.
The Island Handler includes:
6 Grabo Pro vacuum cups
3 – 42” Panel Handler bridges
3 – 106” aluminum rails
3 – 84” aluminum rails
This system provides maximum coverage and stability on your larger islands, even on your most porous and fragile natural stones.
Don’t sweat that next fragile quartzite island with a cooktop cutout on the end, get the Island Handler and know that it will be installed without risk to the piece or your installers!
Laminated Counter – EDGE SLIDERS
Installing mitered or laminated counters? Install them with ease with the patented Edge Sliders
All products will be shipped out the next business day (including orders with next day shipping).
Our lifter feet are designed to accommodate laminated/mitered edges up to 6cm (2 1/2″). Also included are the oversized shepherd hooks that ensure that laminated counters can be secured to the cart during transport.
Kit includes:
2 – Long Extended Shephard Hooks
2 – Short Extended Shephard Hooks
4 – Extended Lifter Feet w/ Bolt, Nut, and Rubber*
If you’re not backfilling your pieces, we recommend the Edge Slider Kit!
* For older No Lift Systems with five lifter feet, we recommend removing the center (5th) lifter foot.
All products will be shipped out the next business day (including orders with next day shipping).
After testing with real installers on active job sites for years, we have officially solved the mitered edge and lamination problem. Our design is simple but effective. Easily place the Edge Slider on the deck of the cart in any configuration. The Edge Slider moves with the piece and back of the lamination as illustrated in our videos.
No Lift Install System is the ONLY cart to provide this solution for installers.
This kit includes the updated Extended Lifter Kit
**Not currently compatible with the Econo Tilt cart.**
All products will be shipped out the next business day (including orders with next day shipping).
Set of two chock books that are sold with the Edge Slider Kit
They are designed to accommodate mitered or laminated edges during transport on the No Lift System.
Additional Tools
Installing out of a pickup or Sprinter van? Easily transport your No Lift with the Cart Caddie
All products will be shipped out the next business day (including orders with next day shipping).
Transport your No Lift System on the road with confidence! The “Big Eddie” Cart Caddy is built to securely transport your No Lift System on pickup truck install rigs, keeping your cart protected, secure, and ready for the job.
With a heavy-duty hitch and post system, this caddy ensures your No Lift cart stays in place during transport, while the included Cart Cover shields it from the elements—so it’s always in top condition when you need it.
What’s Included:
✔ Hitch & Post – Securely mounts to your truck for safe transport
✔ Cart Caddy – Designed specifically for No Lift System carts
✔ Pins, Clips, Bolts & Nuts – Everything needed for a rock-solid setup
✔ Receiver Pin & Clip – Ensures stability on the go
✔ No Lift System Cart Cover – Protects against weather, dust, and debris
📏 Dimensions: 32″ x 21″ x 7″ | Weight: 50 lbs
Upgrade your install rig and keep your No Lift System protected and ready for every job.
Installing a lot more full-height backsplash these days?
Cringing when you think about setting those big pieces of splash and the possibility of scratching the new counters you’ve installed?
Does your lower back start to hurt when you think about the lifting required to reach over the counters to set those tight-fitting splashes into place?
That’s how we used to feel about them too! That’s why we adapted our No Lift cart technology to make installing Full Height BS easy. In fact, it’s so easy, you will no longer dread those jobs!
The FH BS Sliders have nylon transfer balls so you can slide and position splashes that are face down and white non-marking rubber on the bottom to protect the counters you have installed.
3 Sliders are included in the package. Includes roll of protective film.
All products will be shipped out the next business day (including orders with next day shipping).
All products will be shipped out the next business day (including orders with next day shipping).
Replacement Protective Film – 18”x100’
Out of electrostatic film for your Full Height Backsplash Sliders? Always keep it on hand to protect those fragile materials!
Save $5 per roll when you purchase 3 or more!$49.95/roll, $44.95/roll 3 or more
All products will be shipped out the next business day (including orders with next day shipping).
If you plan on transporting your No Lift cart on a hitch basket, open trailer, or pickup bed, you MUST protect it from the elements. Rainwater and de-icing chemicals will corrode critical components and cost you money to repair. Our cart cover is a highly durable waterproof 210d Cordura. It will not leak and it will protect your investment!
Outriggers are included with Power Tilt cart.
Islands are getting bigger and counters are getting taller.
Reduce your anxiety and reduce risk of tipping your No Lift during install with our brand-new Outrigger set.
While originally designed for the Power Tilt, it creates incredible stability on the original Manual Tilt model as well. Simply slide the outriggers into the base and set the levelers, then you are ready to tilt taller counters with zero risk of tipping the cart in the process.
Outrigger includes:
2 – outriggers
2 – levers and leveler tubes
All products will be shipped out the next business day (including orders with next day shipping).
Warning: Outriggers do not increase rated weight capacity of 600# Manual Tilt or 900# Power Tilt model carts.
All products will be shipped out the next business day (including orders with next day shipping).
Your No Lift cart is now lithium battery compatible! The No Lift “Lithium Battery Compatibility Kit” allows you to extend the use of your cart with the batteries that power your cordless tools! This kit will work with Milwaukee and DeWalt batteries. Converting to a battery adapter is easy and only requires a Phillips screwdriver and a few minutes.
Refer to the chart to determine specific compatible batteries.
Compatible with all Manual Tilt Carts
Click here for step-by-step instructions.
All products will be shipped out the next business day (including orders with next day shipping).
Keep your cart in place while you load counters with the No Lift Brake Pads.
These closed-cell foam pads are positioned to keep your cart from moving while you load the counters. Once loaded, you can easily push the cart and counters away from your install rig and into the work area.
Pads are 12″ x 30″, 2 per set
No Lift System Parts
If your No Lift System is currently under warranty or the part you need is not listed, please use this form to contact us.
All products will be shipped out the next business day (including orders with next day shipping).
We highly recommend updating your cart to the Lithium Battery Compatibility Kit
12 V Battery for Cart. Comes with Zip Tie and Fuse Pack
All products will be shipped out the next business day (including orders with next day shipping).
21″ – Short ‘S’ Hooks
This is the standard 2″ shepherd hook, if you have the 3″ Lifter Kit please order this model.
All products will be shipped out the next business day (including orders with next day shipping).
We highly recommend updating your cart to the Lithium Battery Compatibility Kit
NOCO Charger & Fuse pack- 1.0 A for No Lift battery. This 1 amp replaces the .750 amp
Contact your sales rep for availability.
All products will be shipped out the next business day (including orders with next day shipping).
Flat Chock Rubber – 2 pieces
All products will be shipped out the next business day (including orders with next day shipping).
We highly recommend updating your cart to the Lithium Battery Compatibility Kit
CTEK Battery Charger US 0.8
All products will be shipped out the next business day (including orders with next day shipping).
1 Remote Control Fob with Lanyard
Includes Pairing Instructions
All products will be shipped out the next business day (including orders with next day shipping).
41″ – Long ‘S’ Hook
This is the standard 2″ Shepherd hook, if you have the 3″ Lifter Kit please order the 3″ Shepherd hooks.
All products will be shipped out the next business day (including orders with next day shipping).
Full Plastic End Cap Replacement Kit
6 – 1X1 W/GLUE/BOX
10 – 1X2 W/GLUE/BOX
2 – 2X2 W/ GLUE/BOX
2 – CUT 2X2 ‘H’ FRAME W/ GLUE/BOX
4 – 2X4 W/ GLUE/BOX
All products will be shipped out the next business day (including orders with next day shipping).
IMPORTANT: 2 types of transfer balls have been used on the No Lift Carts. Please use the images to identify your style and order accordingly.
All packs come with the hardware needed.
All products will be shipped out the next business day (including orders with next day shipping).
We highly recommend updating your cart to the Lithium Battery Compatibility Kit
NOCO Genius 5-Amp Charger for No Lift battery.
All products will be shipped out the next business day (including orders with next day shipping).
Includes:
Lock Pin Release Cable
Cable Guard Screws
Alignment Tools
Shims
Misc. Hardware
Instruction Manual
All products will be shipped out the next business day (including orders with next day shipping).
1 Stainless ‘T’ Handle for the long or short shepherd hooks.
All products will be shipped out the next business day (including orders with next day shipping).
Replacement Lifter Feet Rubber Strips – 5 pieces
All products will be shipped out the next business day (including orders with next day shipping).
IMPORTANT: 2 types of transfer balls have been used on the No Lift Carts. Please use the images to identify your style and order accordingly.
All packs come with the hardware needed.
All products will be shipped out the next business day (including orders with next day shipping).
Lost or broke your Power Tilt remote? Order a replacement here. Includes 1 remote and instructions for pairing to your cart.